Single Channel Vehicle Loop Detector with 12-24VADC for Parking
Barrier Gate Safety
Product Name: (Loop Sensor)
Description: The Parking Barrier Gate Loop Detector (LD-102) is a specialized
sensor designed for parking barrier gates, facilitating seamless
automatic gate operation by efficiently identifying and detecting
various vehicles, including oversized vehicles, trucks,
motorcycles, and more.
Advantages:
- Wide Sensing Range and Enhanced Sensitivity: With a sensing range from 15 to 2000μH and heightened sensitivity,
the LD-102 accurately detects diverse vehicles, ensuring dependable
detection performance.
- Automatic Reset Capability: The LD-102 is equipped with an automatic reset feature that
activates in case of malfunction, eliminating manual intervention
and enhancing system stability and reliability.
- Flexible Detection Level Selection: Offering 16 selectable levels ranging from 0.008% DL/L to 2.50%
DL/L, the LD-102 can be tailored to specific requirements, suitable
for various application scenarios.
- Robust 40000V Lightning Protection: With robust lightning protection of 40000V, the LD-102 effectively
shields against lightning strikes, ensuring sustained operation
under adverse conditions.
- Broad Operating Environment Range: Designed to thrive in diverse environments, the LD-102 operates
within a temperature range from -40°C to +70°C, ensuring consistent
performance in challenging weather conditions.
The Parking Barrier Gate Loop Detector (LD-102) delivers robust and
reliable vehicle detection capabilities for parking barrier gates,
offering wide sensing range, enhanced sensitivity, automatic reset
capability, flexible detection level selection, robust lightning
protection, and broad operating environment range.
Product parameters:
| Specification | Value |
| Self-turning Range | 20-2000μH |
| Sensitivity | 16-way selectable / Highest 0.010% DL/L / Lowest 2.56% DL/L |
| Frequency | Four-step switch selectable 20-80KHz |
| Power Requirements | 110-240VAC (48 to 62Hz) / 12-24VADC |
| Operation Temp | -40℃ to +70℃ / (-111°F to +158°F) |
| Fault Output | Blinks slowly: may indicate a short circuit or insufficient number
of turns <br> Blinks faster: may indicate an open loop or
excessive number of turns |
| Response Times | Turn-on 10-90MS / Turn-off 10-90MS |
| Visual Indications | Power LED - Red <br> Channel LED - Green |
| Reset | Reset by push button on the front of the enclosure |
| Relay Output | Presence relay / Fault relay |
| Humidity | Up to 95% relative humidity without condensation |
Switch 2 (Dipswitch Settings)
1.DIP 1 & DIP 2 Setting Special Functions
2.DIP 3 & DIP 4 Setting Relay B Output
3. DIP 5 Setting Automatic Reset
4. DIP 6 & DIP 7 & DIP 8 Setting Relay A Delay
5. DIP 9 & DIP 10 Setting Frequency (40 K to 100 KHz). Used to
avoid the interference
Loop Installation:
Trouble Shooting:
Mass Production:
Our production line ensures efficient mass production, rigorous
quality control, and thorough pre-shipment testing to deliver Loop
detector products of the utmost perfection.
Certification:
